|
Patio
Pet Door FAQs
Do you have dual pane/insulated glass?
If so, you may be glad to know about the Thermo Panel IIIe,
both Hale Pet Door Panels, Pet 1 Products and
Ideal VIP. They all offer a dual-pane insulated glass panel. Even
better, you can get "Low E" glass in the Thermo Panel IIIe,
and the Ideal VIP. Hale Patio Pet Door offers "Low E" at extra
cost.
You may choose any single pane glass panel instead; however, dual pane glass pet doors give the best energy and acoustic performance. How do I tell if the glass is dual-pane or single pane? Easy. Open your slider and put a finger on both sides of the glass. If your fingers look like they're touching, you have single pane glass. If they stop about 1/2" apart, you have dual pane glass.
Do you have anything for my newer vinyl framed
sliding glass door?
If so, and if the flap dimensions are suitable for your pets, then get
the new Ideal VIP panel. You'll be
thrilled with the result. If the flap dimensions are not appropriate, or
if you need a temporary installation,
then the new Thermo Panel IIIe is your best choice. Which track shall I install in? Most people install panel pet doors in the glass track against the sliding door jamb and that is the recommended approach.
Some choose an outside screen track. In that case, we suggest you use a 'spring-load' type like the
Quick Panel III or the Ideal Fast Fit.
Please notice that the thickness of the pet door will not be the same as the thickness of your track. There are too many track widths to make a separate panel for each one and so no manufacturer does. They are all built on the 'thin' side so as to fit any sliding door track. Properly installed, this fact is not noticeable. Do I want a 'temporary' or a 'semi-permanent' installation? A temporary installation panel pet door may be put in and taken out again easily. Use them when you don't want the panel installed all the time. You might, for example, wish to use the panel only during warm weather or only when you are at home. A semi-permanent only pet panel, on the other hand,
must be fastened into the track with sheet metal screws.
The reason is that the manufacturer has put the lock on the
pet door which mates to a bracket on the sliding glass door.
For that lock to work, the panel must be fastened in place. The
Hale 'Standard' Panel and PetSafe Deluxe are examples of this type of installation.
There are, as well, as
group of patio panel inserts that are neither a 'temporary'
install or a 'semi-permanent' install but somewhere in
between. That is they may require tools to set up but are
not fastened into your track with sheet metal screws
Hot Tip: If a semi-permanent install is desired and the furniture and drapes permit, installing between the stationary panel and the opposite wall may be excellent. By so doing you may avoid needing to reset an alarm system or you may allow use of an existing outside keyed lock.
Hot Tip: A little
understood fact is that all pet doors designed for temporary
installation may be made semi-permanent by fastening them into the track with sheet metal screws.
So a temporary type panel has the broadest range of
installation choices.
What 'rise' do I want?
'Rise' is the height that the flap is raised above the ground. So a
Bassett Hound and a Doberman may both be able to use a typical 'large'
size flap but only if the 'rise' is set low for the Bassett and higher
for the Dobe. The rule is that you want the rise to be tall enough
to get the top of the flap at least as tall as the height of the pet at
the top of his shoulder. So, if you are using a 10"x15" flap for a dog
standing 22" at the withers, you'd like the rise to be at least 7".
But that isn't the end of the story. What happens when
the dog gets old or arthritic and has trouble stepping over 7"? Then
you'll wish you had bought a taller flap with a shorter rise!
So one thing to look for in a flap is 'aspect ratio'
which is the ratio of the height to the width. Taller aspect ratio flaps
allow for lower rises in fitting the same dog. The pet panels with the
highest aspect ratios on the market today are the Thermo Panel IIIe and
Quick Panel III with the new Endura flap, and the Hale 'Standard' and 'Omni' panels. You can
simply buy a larger size in a different brand, of course, to get more
flap height. But then you'll be getting more width than you need in addition to
the additional height. Major disadvantages of excess width include loss
of space in the opening for people use and additional cost. Worse,
sometimes going from an 8" width to a 10" width introduces a
security problem. 10" x 15" is large enough for a person to
wiggle through. 8" x 15" isn't in most cases.
What if your tall dog goes to the Rainbow Bridge and you replace him
with a shorter one (from the local shelter, of course!)? Now the little guy
can't get over the rise that was easy for the big guy. Ideally, you've
purchased a panel with a 'user adjustable rise'. Then you can simply
lower the flap to accommodate him. At present, the only pet door panels
with a user-adjustable rise are the Thermo Panel IIIe, Quick Panel III
and Pet 1 Products (under license from Patio Pacific, us).
Can I return a panel after purchase?
Yes, our regular return policy applies to all panel pet
doors except custom doors. However,
please be alert to a specific problem area:
A
few customers have applied the weather-strip to the edge of
the panel before deciding that they really want it. When
those panels are returned, it takes a considerable amount of
labor in the shop to remove that weather-strip. In some cases, the panel had to be completely
rebuilt. These costs will be deducted from your refund or;
if the damage is severe, the return may not be accepted.
Please ensure that your
purchase is satisfactory before attaching weather-strip. Please read our "Restocking
Fees" page in this regard. |